Topdressers for Grounds Management

310 SP advert image shown if present
Image shown for entry if relevant and present

A make of pedestrian self-propelled top-dresser with 2 spinning disc distributors. It has a spreading width from 2.4m to 6m, a hopper capacity of up to 0.34m³ (heaped), weighing 363kg without any top-dressing material present. It is manufactured by Dakota.

CR Series advert image shown if present
Image shown for entry if relevant and present

A make of trailed topdresser with spinning disc, being manufactured by Turfco. • CR-8: Hopper capacity = 1.54m³; 0.46m wide conveyor belt; Spreading width from 3.6m to 12.0m; Top-dressing speed is up to 12.8km/h. • CR-10 and CR-15: Hopper capacity = 3.06m³; 0.81m wide conveyor belt; Top-dressing speed is up to 9.6km/h.

Easy Spread advert image shown if present
Image shown for entry if relevant and present

A make of pedestrian and tractor mounted top-dresser. A small hand spreader has a working width of 0.6m, whilst 4 tractor mounted spreaders have working widths of 1.0m, 1.4m, 1.5m, and 2.0m; it is manufactured by Redexim-Charterhouse.

Infiller advert image shown if present
Image shown for entry if relevant and present

A top-dressing unit (Model IF150) with a working width of 1.6m, and a capacity of 1.06m3 or 3m3. The four-wheeled power unit has a maximum speed of 20 km/h. It is manufactured by GKB Machines.

Mete-R-Matic advert image shown if present
Image shown for entry if relevant and present

A make of top-dresser, with three models, the trailed self-powered by wheel to ground traction (models IV and XL) and the pedestrian self-propelled, 5.5hp powered model, all being manufactured by Turfco. The self-propelled model has a hopper capacity of 0.33m³, a spreading width of 88cm, and a top working speed of 4 km/h. The trailed models both have a spread width of 1.5 as well as a top-dressing speed of up to 12.8 km/h, with the hopper capacity for each being 0.76m³ for the IV model and 1.72m³ for the XL model.

MH400 advert image shown if present
Image shown for entry if relevant and present

A make of top-dresser for towing behind tractors. It has a 3.06m³ hopper capacity, with a spread width from 2.74m ¯ 12.2m depending upon settings. Twin spinners are available for maximum spread width. This is manufactured by the Toro Company.

Powaspred advert image shown if present
Image shown for entry if relevant and present

A make of tractor mounted top-dresser, requiring a minimum of 15 hp, with an oscillating base plate and rotating brush. It has a working width of 1.2-metres; it is manufactured by SISIS.

ProPass advert image shown if present
Image shown for entry if relevant and present

A make of top-dresser for mounting on utility vehicles or for towing behind tractors or utility vehicles. It has a 0.53m3 hopper capacity. This is manufactured by the Toro Company.

Rink Top-dresser advert image shown if present
Image shown for entry if relevant and present

A make of top-dresser, from pedestrian to utility vehicle, and tractor mounted. There are about 20 models available in total and are manufactured by Redexim. • Rink DS800: Tractor requirement = 30hp; 4 wheels on rear axle; 2.4m length; 0.8m3 hopper being able to apply up to 15mm depth of top-dressing material, with a variable spread pattern of up to 12m. • Rink DS1600: Introduced in 2023 with a tractor requirement of 35hp; 4 wheels on rear axle; 3.75m length; 1.6m3 hopper being able to apply up to 20mm depth of top-dressing material with a variable spread pattern from 2m to 12m.

Rover XR advert image shown if present
Image shown for entry if relevant and present

A make of stand-on 4-wheeled mini 'tractor' spreader. It has a high speed of 5 mph, a width of 90cm and a 100kg hopper capacity. It is manufactured by Allett.