Rotary, flail and other mowers for Grounds Management

Pegasus S4 advert image shown if present
Image shown for entry if relevant and present

A make of tractor operated rotary mower, with 2 models: 493 and 610, manufactured by Trimax. 493: cutting width of 4.93m, 9 blade spindles, weighing 2180kg, requiring a tractor with a minimum PTO output of 50hp, height of cut range being 10mm-100mm, cutting 11 acres (4.45 ha) at 6mph (9.7 km/hr); 610: cutting width of 6.07m, 11 blade spindles, weighing 2409kg, requiring a tractor with a minimum PTO output of 55hp, height of cut range being 10mm-100mm, cutting 14 acres (5.67 ha) at 6mph (9.7 km/hr).

Pro advert image shown if present
Image shown for entry if relevant and present

A range of pedestrian rotary mowers, all powered by petrol engines and being produced by Etesia.

Pro 34R advert image shown if present
Image shown for entry if relevant and present

A 34 inch (860mm) pedestrian operated rotary mower. It has a two-section rear roller, front brush attachment to raise up grass blades prior to cutting, as well as 5 forward and 1 reverse options, with a 90-litre grass box. It is manufactured by Dennis Mowers.

Procut FM advert image shown if present
Image shown for entry if relevant and present

A make of tractor operated rotary mower, which is the front mounted version of the Procut S4, with the features being the same for the 4 models: 178, 210, 237 and 290, manufactured by Trimax.

Procut S4 advert image shown if present
Image shown for entry if relevant and present

A make of tractor operated rotary mower, with 4 models: 178, 210, 237 and 290, manufactured by Trimax. • 178: cutting width of 1.74m, 3 blade spindles, weighing 511kg, requiring a tractor with a minimum PTO output of 30hp, height of cut range being 10mm-100mm, cutting 4 acres (1.62 ha) at 6mph (9.7 km/hr); • 210: cutting width of 2.06m, 3 blade spindles, weighing 608kg, requiring a tractor with a minimum PTO output of 36hp, height of cut range being 10mm-100mm, cutting 4 acres (1.62 ha) at 6mph (9.7 km/hr); • 237: cutting width of 2.32m, 4 blade spindles, weighing 641kg, requ

Continue reading about this

Profihopper advert image shown if present
Image shown for entry if relevant and present

A make of ride-on flail mower, with large grass / vegetation collection tank mounted behind the operator. There are three models, all diesel powered: 1250 (in 2- or 4-wheel drive) and 1500, with cutting widths of 1.25 and 1.5m respectively. The flail blades (either 36 or 44 pairs, depending on the model) can also be swapped over for scarifying blades. The height of cut adjustment is from 0 ¯ 90mm and the collection tank capacity is from 730 ¯ 1,100 litres. They are manufactured by Amazone.

ProFlex 120 advert image shown if present
Image shown for entry if relevant and present

A make of tractor pulled rotary mower units giving a total cutting width of 3.05m with 5 decks. The height of cut range is from 19mm to 76mm and the mowing output is given as 4.4 acres at 4mph and 6.5 acres at 6mph.It is manufactured by Progressive Turf Equipment.

ProStripe advert image shown if present
Image shown for entry if relevant and present

A pedestrian 3-speed self-propelled rotary mower, having a 1.7 litre fuel (petrol) tank, 80 grass litre collection bag, 56cm blade and with a height of cut range from 13mm to 60mm, in 3.6mm increments. It has a two-piece ribbed roller for creating stripes and is suitable for post-match cleanup on a winter sports pitch, as well as for amenity lawns. It is manufactured by Toro.

R14SFINX advert image shown if present
Image shown for entry if relevant and present

A side mounted mower disc (trimmer) attachment for use with the remote controlled rotary mowers manufactured by Raymo, especially the R48Craft mower.

R311T advert image shown if present
Image shown for entry if relevant and present

A ride-on 3-deck rotary mower, with a 163cm front deck, and two 107cm side wing decks, producing a total cutting width of 340cm. The cutting height is from 25mm to 140mm, in 12.5mm increments and the maximum mowing capacity is up to 4.1 hectares per hour (without overlaps) at a speed of 12.4 km/h, so the practical output will typically be slightly less. It is manufactured by Jacobsen.