Rotary, flail and other mowers for Grounds Management

Groundkeeper [2] advert image shown if present
Image shown for entry if relevant and present

A make of tractor PTO operated flail mower, with large grass / vegetation collection tank, consisting of numerous models. Cutting widths range from 1.35 ¯ 2.1m, with tank capacities ranging from 1,350-3,500 litres. of 1.25 and 1.5m respectively. The flail blades can also be swapped over for scarifying blades. They are manufactured by Amazone.

Groundsmaster Range advert image shown if present
Image shown for entry if relevant and present

A make of ride-on rotary mower, with 23 different models. They have from 1 to 5 cutting decks, with the base deck being 1.83m cutting width, consisting of 3 separate rotary blades. The maximum width of cut for the largest model is 4.9m. These are manufactured by the Toro Company.

Harrier advert image shown if present
Image shown for entry if relevant and present

A make of pedestrian rotary mower. There are 3 main models, and additional sub-models. The cutting widths are 410mm, 480mm, and 560mm, all with a height of cut range from 13mm to 60mm. It is manufactured by Hayter Limited.

Hawk [1] advert image shown if present
Image shown for entry if relevant and present

A product name for a pedestrian operated, 31cm cutting width, rotary mower for use in enclosed spaces such as cemeteries. The height of cut range could be from 21mm to 41mm. It was originally manufactured by Hayters Ltd in the early 1970s.

Hawk Major advert image shown if present
Image shown for entry if relevant and present

A product name for a pedestrian operated, 48cm cutting width, rotary mower, with a height of cut range from 22mm to 45mm. It was originally manufactured by Hayters Ltd in the early 1970s.

Hayterette Push advert image shown if present
Image shown for entry if relevant and present

A make of pedestrian rotary mower, with a cutting width of 457mm and a height of cut range from 13mm to 70mm. It is manufactured by Hayter Limited.

HM600 advert image shown if present
Image shown for entry if relevant and present

A make of ride-on flail mower, with 3-units. The front deck is 1.6m wide; with two wing decks each being 1.0m wide; the overall cutting width is 3.2 metres. The height of cut ranges from 30mm to 70mm, whilst the cutting performance is 3.46 hectares per hour, at a speed of 12 km per hour. It is manufactured by Ransomes Jacobsen Ltd.

HoverPro Series advert image shown if present
Image shown for entry if relevant and present

A make of hover mower with 3 models (400, 450, 550), having cutting widths of 40cm, 46cm and 53cm. The height of cut ranges from 18mm to 30mm. They are manufactured by Toro.

HR Range [1] advert image shown if present
Image shown for entry if relevant and present

A make of ride-on rotary mowers, with 4 models, each having 3 mowing decks. Mowing width ranges from 3m to about 4.9m, depending upon the size of deck in the model used. Heights of cut varies from 25mm ¯ 152mm, but not over all that range for each model. Mowing capacity varies from 3.24 ¯ 5.87 ha/hr. These are manufactured by Jacobsen.

Hydro advert image shown if present
Image shown for entry if relevant and present

A range of ride-on rotary mowers, with 7 models, having cutting widths of either 80cm, 100cm or 124cm, being produced by Etesia.